Lenze L-force HighLine C 8400 Series Reference Manual page 100
Inverter drives
Hide thumbs
Also See for L-force HighLine C 8400 Series:
- Mounting instructions (16 pages) ,
- Reference manual (1602 pages)
Table of Contents
Advertisement
8400 HighLine C | Reference manual
Device control (DCTRL)
How to get to the parameterisation dialog of the device control:
1. In the »Engineer«, go to the Project view and select the 8400 HighLine controller.
2. Go to Workspace and change to the Application parameters tab.
3. Go to the Overview dialog level and click the Drive interface button.
Parameterisation dialog in the »Engineer«
The parameterisation dialog shows the input / output signals and the internal signal flow
of the
LS_DriveInterface
block editor:
Range / Meaning
Display of the control word via system bus (CAN)
Display of the control word via communication module (e.g. PROFIBUS)
Display of the internal state machine and the current device status
Display of all active sources of a controller inhibit
Display of all active sources of a quick stop
Display of the status word of the device control
100
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
system block which displays the device control in the function
L
Display parameter
C00136/2
C00136/1
C00137
C00158
C00159
C00150
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011
Hide quick links:
Advertisement
Table of Contents
