5.4.2
Basic settings
The "Initial commissioning steps" listed in the table below are sufficient for a simple
characteristic control.
Detailed information on the individual steps can be found in the following
subchapters.
Initial commissioning steps
1.
Defining the V/f characteristic
2.
Defining current limits (Imax
Tip!
Information on the optimisation of the control mode and the adaptation to the
real application is provided in the
Parameterisable additional functions are described correspondingly in the chapter
"Parameterisable additional
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
8400 HighLine C | Reference manual
shape.
( 154)
controller).
( 155)
"Optimising the control
functions".
( 243)
L
Motor control (MCTRL)
V/f characteristic control (VFCplus)
mode" chapter.
( 156)
153