Lenze L-force HighLine C 8400 Series Reference Manual page 504

8400 HighLine C | Reference manual
Basic drive functions (MCK)
Homing
Mode 13: <_Ln
 Negative travel range limit switch
Mode 13
Lp
Ln
Functional sequence:
1. Movement in negative direction with start profile data set.
2. Positive edge of the travel range limit switch sets reference.

Note!
The load machine can also leave the travel range limit switch. There follows a
return to the home position that was set with the positive edge of the travel
range limit switch.
• It is possible that, as a result, the machine will remain on an operated limit
switch.
• It is therefore recommended that a home value offset be set in
order to release the operated limit switch.
504
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
1
0
<
Start speed
Inactive
Inactive
L
Ln Offset path
Inactive Active
Inactive Inactive
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011
Sequence profile (optional)
Profile speed
Active
Active
C01227/1 in