Lenze L-force HighLine C 8400 Series Reference Manual page 956

8400 HighLine C | Reference manual
Parameter reference
Parameter list | C01300
C01300
Parameter | Name:
C01300 | Profile data: Positioning mode
Selection of the positioning mode for profiles 1 ... 15
Selection list
956
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
1 Absolute (shortest path)
2 Continuous
3 Relative
4 absolute (Cw)
5 absolute (Ccw)
8 Absolute (shortest path) to TP
9 Continuous to TP
10 Relative to TP
11 Absolute (Cw) on TP
12 Absolute (Ccw) on TP
L
Info
Absolute positioning
• The profile position corresponds to the target
position.
Continuous positioning without approaching a target
position
Relative positioning
• The profile position determines the distance to be
traversed.
From version 06.00.00
Clockwise absolute positioning
• The zero position of the axis can be exceed in this
direction.
• The profile position corresponds to the target
position.
From version 06.00.00
Counter-clockwise absolute positioning
• The zero position of the axis can be exceed in this
direction.
• The profile position corresponds to the target
position.
From version 06.00.00
Absolute positioning
• The profile position corresponds to the target
position.
• After a touch probe is detected, the TP profile
(C01308/1...15) is executed.
From version 06.00.00
Continuous positioning without approaching a target
position
• After a touch probe is detected, the TP profile
(C01308/1...15) is executed.
From version 06.00.00
Relative positioning
• The profile position determines the distance to be
traversed.
• After a touch probe is detected, the TP profile
(C01308/1...15) is executed.
From version 06.00.00
Clockwise absolute positioning
• The zero position of the axis can be exceed in this
direction.
• The profile position corresponds to the target
position.
• After a touch probe is detected, the TP profile
(C01308/1...15) is executed.
From version 06.00.00
Counter-clockwise absolute positioning
• The zero position of the axis can be exceed in this
direction.
• The profile position corresponds to the target
position.
• After a touch probe is detected, the TP profile
(C01308/1...15) is executed.
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011
Data type: UNSIGNED_8
Index: 23275 = 5AEB
d h
Profile entry