Lenze L-force HighLine C 8400 Series Reference Manual page 581

Error type
Bit 31 30
29 26
The error type gives information about the behaviour/response of the controller to the
error. The error type for some device errors can also be parameterised.
Bit 29
0
0
0
0
0
0
0
Error subject area
Bit 31 30 29 26
The error subject area indicates the internal "function unit" of the controller in which the
error has occurred:
Error subject area
No. Name
111 Supply voltage
119 Temperature
123 Motor management / encoder
125 Analog I/O integrated
127 Extension module slot 1
131 CAN integrated (general)
135 CAN process data object (PDO)
140 Device configuration
144 Parameter set
145 Device firmware (internal error)
184 MotionControlKernel
400 Defective device hardware
444 Fieldbus
980 User error 1
... ...
983 User error 4
984 User error 5
... ...
987 User error 8
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
25 16 15
Bit 28 Bit 27
0 0
0 0
0 1
0 1
1 0
1 0
1 1
25 16 15
Assigned errors
Errors that occur in connection with the supply voltage of the device. Yes
Errors that occur for temperature reasons.
Errors that occur within the motor control or encoder evaluation.
Errors that occur in connection with the analog inputs and outputs.
Errors that are reported by the extension module, and
communication errors to the plugged-in extension module.
Errors related to general CAN functions.
Errors that are explicitly only related to the CAN-PDO (process data
objects).
Errors that occur due to incompatibilities of the plugged-in individual
components (fieldbus module, safety module, et al.).
Errors that occur in connection with the parameter set or the
parameter set memory (memory module).
Internal error of the device firmware.
Errors that occur within the MotionControl basic functions (e.g.
profile generation, brake control, positioning).
Errors that occur due to defective device hardware.
Errors that occur in connection with fieldbus communication.
Errors generated by the user (by the application) via the
LS_SetError_1
Errors generated by the user (by the application) via the
LS_SetError_2
L
8400 HighLine C | Reference manual
Diagnostics & error management
Error messages of the operating system
0
Bit 26 Meaning
0 0: No response
1 1: Fault
0 2: Trouble
1 3: TroubleQSP
0 4: WarningLocked
1 5: Warning
0 6: Information
0
system block.
system block.
Remedy possible by
user?
Yes
Yes
Yes
Yes if it is a fieldbus error.
Yes
Yes
Yes if the error relates to a
module plugged-in by the
user.
Yes if the error relates to a
missing or incompatible
memory module.
No
Yes
No
Yes
Yes
Yes
581