Lenze L-force HighLine C 8400 Series Reference Manual page 909

C00985
Parameter | Name:
C00985 | SLVC: Field current controller gain
Gain of the direct-axis current difference (Id) between setpoint and actual current for the voltage model of the
sensorless vector control (SLVC)
• The gain should be selected in a range of 0 ...1 %.
Setting range
(min. value | unit | max. value)
0.00
Read access
C00986
Parameter | Name:
C00986 | SLVC: Cross current controller gain
Gain of the cross current difference for the voltage model of the sensorless vector control (SLVC)
Setting range
(min. value | unit | max. value)
0.00
Read access
C00987
Parameter | Name:
C00987 | Inverter motor brake: nAdd
From version 04.00.00
Speed lift which is connected in pulses to the brake rampe when the motor is braked.
Setting range
(min. value | unit | max. value)
0
Read access
C00988
Parameter | Name:
C00988 | Inverter motor brake: PT1 filter time
From version 04.00.00
PT1 filter time for smoothing the speed lift which is added in pulses (C00987)
Setting range
(min. value | unit | max. value)
0.0
Read access
C00990
Parameter | Name:
C00990 | Flying restart fct.: Activation
Switch on/activate flying restart circuit for non-feedback drive systems
Selection list
(Lenze setting printed in bold)
Read access
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
%
Write access CINH PLC STOP
%
Write access CINH PLC STOP
rpm
Write access CINH PLC STOP
ms
Write access CINH PLC STOP
0 Off
1 On
Write access CINH PLC STOP
L
8400 HighLine C | Reference manual
Lenze setting
10.00 0.50 %
No transfer COM MOT Scaling factor: 100
Lenze setting
10.00 0.00 %
No transfer COM MOT Scaling factor: 100
Lenze setting
1000 80 rpm
No transfer COM MOT Scaling factor: 1
Lenze setting
100.0 0.0 ms
No transfer COM MOT Scaling factor: 10
No transfer COM MOT Scaling factor: 1
Parameter reference
Parameter list | C00985
Data type: INTEGER_16
Index: 23590 = 5C26
d h
Data type: INTEGER_16
Index: 23589 = 5C25
d h
Data type: INTEGER_16
Index: 23588 = 5C24
d h
Inverter motor brake
Data type: INTEGER_16
Index: 23587 = 5C23
d h
Inverter motor brake
Data type: UNSIGNED_8
Index: 23585 = 5C21
d h
Flying restart fct.
909