Lenze L-force HighLine C 8400 Series Reference Manual page 98

8400 HighLine C | Reference manual
Commissioning
PC manual control

How to execute a positioning:
1. Select the profile to be travelled (1 ... 15) in the Profile number list field.
2. If the controller is still inhibited, enable the controller via the Enable controller
button.
• Please observe that the controller will not be enabled if other sources of
controller inhibit (e.g. terminal RFR) are active.
If the controller is in the "OperationEnabled" status:
3. Click the Run POS button to start the positioning process.
• Click the Stop POS button to stop an active positioning process anytime.
98
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
L
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011