Lenze L-force HighLine C 8400 Series Reference Manual page 914

8400 HighLine C | Reference manual
Parameter reference
Parameter list | C01025
C01025
Parameter | Name:
C01025 | L_Curve_2: Selected curve type
From version 11.00.00
FB L_Curve_2: Selected curve type
Selection list
Subcodes
C01025/1
Read access
C01026
Parameter | Name:
C01026 | L_Curve_2: Input limitation
From version 11.00.00
FB L_Curve_2: Upper and lower limit for input value
Setting range
(min. value | unit | max. value)
-199.99
Subcodes
C01026/1
C01026/2
Read access
C01028
Parameter | Name:
C01028 | L_Curve_2: Table X-values
From version 11.00.00
FB L_Curve_2: X-values for characteristic function
Setting range
(min. value | unit | max. value)
-32767
Subcodes
C01028/1
C01028/...
C01028/32
Read access
C01029
Parameter | Name:
C01029 | L_Curve_2: Table Y-values
From version 11.00.00
FB L_Curve_2: Y-value for characteristic function
Setting range
(min. value | unit | max. value)
-32767
Subcodes
C01029/1
C01029/...
C01029/32
Read access
914
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
0 Out = 0
1 Out = In
2 Out = f(In)
3 Out = f(table)
Lenze setting
1: Out = In
Write access CINH PLC STOP
%
Lenze setting
199.99 %
-199.99 %
Write access CINH PLC STOP
Lenze setting
0
Write access CINH PLC STOP
Lenze setting
0
Write access CINH PLC STOP
L
Info
L_Curve_2: Function
No transfer COM MOT Scaling factor: 1
199.99
Info
L_Curve_2: Max. input
L_Curve_2: Min. input
No transfer COM MOT Scaling factor: 100
32767
Info
X values 1 ... 32 for characteristic function
No transfer COM MOT Scaling factor: 1
32767
Info
Y values 1 ... 32 for characteristic function
No transfer COM MOT Scaling factor: 1
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011
Data type: UNSIGNED_8
Index: 23550 = 5BFE
d h
Data type: INTEGER_16
Index: 23549 = 5BFD
d h
Data type: INTEGER_16
Index: 23547 = 5BFB
d h
Data type: INTEGER_16
Index: 23546 = 5BFA
d h