Parameterising The Motor Control - Lenze L-force HighLine C 8400 Series Reference Manual

8400 HighLine C | Reference manual
Commissioning
Commissioning of the "Actuating drive speed" technology application
3.6.3

Parameterising the motor control

1. Go to Workspace and change to the Application parameters tab.
– The motor control parameters, among other things, can be found on the left:
2. In the
3. Adapt the motor control parameters:
Parameter
V/f base frequency
(C00015)
Imax in motor mode
(C00022)
Vmin boost
(C00016)
Related topics:
Notes on motor control
Motor control (MCTRL)
62
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Motor control list field (C00006), select the desired motor control.
Lenze setting
Value Unit
50.0 Hz
47.00 A
1.60 %
( 55)
( 131)
L
Info
Adapting the V/f base frequency ( 157)
Optimising the Imax controller ( 161)
Adapting the Vmin boost ( 159)
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011