Lenze L-force HighLine C 8400 Series Reference Manual page 794

8400 HighLine C | Reference manual
Parameter reference
Parameter list | C00464
C00464
Parameter | Name:
C00464 | Remote: Monitoring timeout
From version 06.00.00
Setting range
(min. value | unit | max. value)
200
Subcodes
C00464/1
Read access
C00465
Parameter | Name:
C00465 | Keypad: Timeout welcome screen
Time setting for the automatic change of the keypad display to the welcome screen
Selection list
(Lenze setting printed in bold)
Read access
C00466
Parameter | Name:
C00466 | Keypad: Default parameter
Setting of the default parameter for the keypad
Setting range
(min. value | unit | max. value)
0
Read access
C00467
Parameter | Name:
C00467 | Keypad: Default welcome screen
Selection of the welcome screen for the keypad
Selection list
(Lenze setting printed in bold)
Read access
C00468
Parameter | Name:
C00468 | Service code
This code is for device-internal use only and must not be written to by the user!
794
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
ms
Lenze setting
2000 ms
Write access CINH PLC STOP
0 Never display welcome screen
5 5 min
15 15 min
30 30 min
60 60 min
Write access CINH PLC STOP
Write access CINH PLC STOP
0 Main menu
1 Parameter list
Write access CINH PLC STOP
L
5000
Info
Remote: Monitoring timeout
No transfer COM MOT Scaling factor: 1
No transfer COM MOT Scaling factor: 1
Lenze setting
65535 51
No transfer COM MOT Scaling factor: 1
No transfer COM MOT Scaling factor: 1
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011
Data type: UNSIGNED_16
Index: 24111 = 5E2F
d h
PC manual control
Data type: INTEGER_32
Index: 24110 = 5E2E
d h
Data type: INTEGER_32
Index: 24109 = 5E2D
d h
Data type: INTEGER_32
Index: 24108 = 5E2C
d h
Data type: INTEGER_32
Index: 24107 = 5E2B
d h