Lenze L-force HighLine C 8400 Series Reference Manual page 501

Mode 10: >_Lp_<_TP
 Touch probe
 Positive travel range limit switch
Mode 10
Lp
Ln
Functional sequence:
1. Movement in positive direction with start profile data set.
2. Reversing when the edge of the positive travel range limit switch is positive and, at the
same time, activation of search profile data set for continued reference searching.
3. Negative edge of the travel range limit switch enables home position detection.
4. Following edge of the touch probe sensor sets home position.
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
0
1
> Lp <
Start speed
Inactive Inactive Inactive
Inactive Inactive Active
L
8400 HighLine C | Reference manual
Basic drive functions (MCK)
1
TP Offset path Sequence profile (optional)
Search speed
Inactive Inactive
Active Active
Homing
Profile speed
Active
Active
501