8400 HighLine C | Reference manual
I/O terminals
Touch probe detection
Parameterisation dialog in the »Engineer«:
Button
Parameter
C02810/3...7
344
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Function
Open the parameterisation dialog for the selected TP source.
Parameter setting ( 345)
Info
TPDigIn3 ... TPDigIn7: Edge selection
L
Lenze setting
Value Unit
0: Off
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011