Lenze L-force HighLine C 8400 Series Reference Manual page 953

C01252
Parameter | Name:
C01252 | MCK: S-ramp times stop
S-ramp times for stop
• Setting "0 s" ≡ no rounding
Setting range
(min. value | unit | max. value)
0.000
Subcodes
C01252/1
Read access
C01295
Parameter | Name:
C01295 | L_MCKStateInterface_1: Pos. selection
From version 04.00.00
Selection of the position to be provided at the dnPosOut_p output of the FB
Selection list
(Lenze setting printed in bold)
Read access
C01296
Parameter | Name:
C01296 | Mode: Position calculation
From version 04.00.00
Selection list
Subcodes
C01296/1
C01296/2
Read access
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
s
Lenze setting
0.000 s
Write access CINH PLC STOP
0 dnPosIn_p
1 Current feed
2 dnSetPos_p
3 dnActPos_p
4 dnDeltaPos_p
5 dnTargetPos_p
Write access CINH PLC STOP
0 dnPosOut_p=dnPosIn_p
1 16 bits: LW=+/-32767
2 16 bits: HW=+/-; LW=0..65535
3 32 bits: HW_LW=+/-214748_3647
Lenze setting
0: dnPosOut_p=dnPosIn_p
1: 16Bit: LW=+/-32767
Write access CINH PLC STOP
L
8400 HighLine C | Reference manual
10.000
Info
MCK: Stop: S-ramp time
• S-ramp time for setpoint speed ramp-down to
standstill.
No transfer COM MOT Scaling factor: 1000
L_MckStateInterface
No transfer COM MOT Scaling factor: 1
Info
L_MckCtrlInterface_1: PosCalcMode
L_MckCtrlInterface_1: PosDisplayMode
No transfer COM MOT Scaling factor: 1
Parameter reference
Parameter list | C01252
Data type: UNSIGNED_16
Index: 23323 = 5B1B
d h
Stop
Data type: UNSIGNED_8
Index: 23280 = 5AF0
d h
Data type: UNSIGNED_8
Index: 23279 = 5AEF
d h
MCKInterface
953