7.4.1
Basic signal flow
[7-5]
Signal flow of the switch-off positioning
Main speed setpoint offset and gain (L_OffsetGainP_1)
Additional speed setpoint offset and gain (L_OffsetGainP_2)
Setpoint generator (L_NSet_1)
Speed setpoint input limitation
Terminal assignment & display of digital control signals
Selection of edge/level for tripping the ramp down and stop functions (L_JogCtrlExtension_1)
Holding brake control
Integrated disposable
Analog switch, arithmetic, multiplication/division, binary delay element, binary logic, analog comparison, D-
flipflop
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
8400 HighLine C | Reference manual
"GeneralPurpose"
functions:
L
Technology applications
TA "Switch-off positioning"
419