Lenze L-force HighLine C 8400 Series Reference Manual page 851

C00805
Parameter | Name:
C00805 | L_MPot_1: Init fct.
The L_MPot_1
Selection list
(Lenze setting printed in bold)
Read access
C00806
Parameter | Name:
C00806 | L_MPot_1: Use
The L_MPot_1
Selection list
(Lenze setting printed in bold)
Read access
C00807
Parameter | Name:
C00807 | L_NLim_1: Max.SkipFrq.
FB L_NLim_1: Maximum blocking frequencies
Setting range
(min. value | unit | max. value)
0.00
Subcodes
C00807/1
C00807/2
C00807/3
Read access
C00808
Parameter | Name:
C00808 | L_NLim_1: Min.SkipFrq.
FB L_NLim_1: Minimum skip frequencies
Setting range
(min. value | unit | max. value)
0.00
Subcodes
C00808/1
C00808/2
C00808/3
Read access
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
FB: Selection of the response at device switch-on
0 Load last value
1 Load lower limit
2 Load 0
Write access CINH PLC STOP
FB: Use of the motor potentiometer
0 No
1 Yes
Write access CINH PLC STOP
%
Lenze setting
0.00 %
0.00 %
0.00 %
Write access CINH PLC STOP
%
Lenze setting
0.00 %
0.00 %
0.00 %
Write access CINH PLC STOP
L
8400 HighLine C | Reference manual
No transfer COM MOT Scaling factor: 1
Info
The motor potentiometer is not used.
• The analog value applied to the nIn_a input is looped
through without any changes to the nOut_a output.
The motor potentiometer is used.
• The analog value applied at the nIn_a input is led via
the motor potentiometer and provided at the nOut_a
output.
No transfer COM MOT Scaling factor: 1
199.99
Info
Maximum blocking frequency for zone 1
Maximum blocking frequency for zone 2
Maximum blocking frequency for zone 3
No transfer COM MOT Scaling factor: 100
199.99
Info
Minimum blocking frequency for zone 1
Minimum blocking frequency for zone 2
Minimum blocking frequency for zone 2
No transfer COM MOT Scaling factor: 100
Parameter reference
Parameter list | C00805
Data type: UNSIGNED_8
Index: 23770 = 5CDA
d h
Data type: UNSIGNED_8
Index: 23769 = 5CD9
d h
Data type: INTEGER_16
Index: 23768 = 5CD8
d h
Data type: INTEGER_16
Index: 23767 = 5CD7
d h
851