Lenze L-force HighLine C 8400 Series Reference Manual page 400

8400 HighLine C | Reference manual
Technology applications
TA "Table positioning"
Identifier
GP: GeneralPurpose
The following outputs are interconnected with logic/arithmetic functions on application level for free usage.
"GeneralPurpose" functions
nGPAnalogSwitchInOut_a
nGPArithmetikOut_a
nGPMulDivOut_a
bGPDigitalDelayOut
bGPLogicOut
bGPCompareOut
bGPSignalOut1
...
bGPSignalOut4
nGPSignalOut1_a
...
nGPSignalOut4_a
bGPDFlipFlop_Out
bGPDFlipFlop_NegOut
bGPCounter1Equal
wGPCounter1Out
Free outputs
The following outputs can freely be interconnected on the application level.
The signals from the application level can be transferred to the I/O level via these outputs.
bFreeOut1 ... bFreeOut8
wFreeOut1 ... wFreeOut4
dnFreeOut1_p
dnFreeOut2_p
400
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Value/meaning
Data type
Analog switch: Output signal
INT
Arithmetic: Output signal
INT
Multiplication/Division: Output signal
INT
Binary delay element: Output signal
BOOL
Binary logic: Output signal
BOOL
Analog comparison: Output signal
BOOL
Binary signal monitor: Output signals
• The signal sources to be output are selected in C00411/1...4.
• A bit coded inversion of the output signals can be parameterised in C00412.
BOOL
Analog signal monitor: Output signals
• The signal sources to be output are selected in C00410/1...4.
• Gain and offset for each output signal can be parameterised in C00413/1...8.
BOOL
D-FlipFlop: Output signal
BOOL
D-FlipFlop: Negated output signal
BOOL
Numerator: Status signal "Comparison value reached"
BOOL
TRUE Comparison value wGPCounter1CmpVal reached.
Numerator: Counter content
• Internal limitation to ± 32767
WORD
• The most significant bit determines the sign!
Free outputs for digital signals
BOOL
Free outputs for 16-bit signals
WORD
Free outputs for 32-bit signals
WORD
L
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011