Lenze L-force HighLine C 8400 Series Reference Manual page 503

Mode 12: >_Lp
 Positive travel range limit switch
Mode 12
Lp
Ln
Functional sequence:
1. Movement in positive direction with start profile data set.
2. Positive edge of the travel range limit switch sets reference.

Note!
The load machine can also leave the travel range limit switch. There follows a
return to the home position that was set with the positive edge of the travel
range limit switch.
• It is possible that, as a result, the machine will remain on an operated limit
switch.
• It is therefore recommended that a home value offset be set in
order to release the operated limit switch.
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
0
>
Start speed
Inactive
Inactive
L
8400 HighLine C | Reference manual
Basic drive functions (MCK)
Lp Offset path
Inactive Inactive
Inactive Active
Homing
1
Sequence profile (optional)
Profile speed
Active
Active
C01227/1 in
503