Lenze L-force HighLine C 8400 Series Reference Manual page 725

C00057
Parameter | Name:
C00057 | Maximum torque
Display of the maximum torque to be generated by the motor
• The maximum torque to be generated by the motor depends on various factors, e.g. on Imax in motor mode
(C00022) and the motor type used.
Display range
(min. value | unit | max. value)
0.00
Read access
C00058
Parameter | Name:
C00058 | Output frequency
Display of the current output frequency
Display range
(min. value | unit | max. value)
-1300.00
Read access
C00059
Parameter | Name:
C00059 | Appl.: Reference frequency C11
Display of the field frequency which corresponds to the reference speed set in C00011.
Display range
(min. value | unit | max. value)
0.00
Read access
C00061
Parameter | Name:
C00061 | Heatsink temperature
Display of the current heatsink temperature
Display range
(min. value | unit | max. value)
-50
Read access
C00062
Parameter | Name:
C00062 | Temperature inside the controller
From version 11.00.00
Display of the current temperature inside the controller
Display range
(min. value | unit | max. value)
-200
Subcodes
C00062/1
Read access
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Nm
Write access CINH PLC STOP
Hz
Write access CINH PLC STOP
Hz
Write access CINH PLC STOP
°C
Write access CINH PLC STOP
°C
Write access CINH PLC STOP
L
8400 HighLine C | Reference manual
65000.00
No transfer COM MOT Scaling factor: 100
1300.00
No transfer COM MOT Scaling factor: 100
1300.00
No transfer COM MOT Scaling factor: 100
150
No transfer COM MOT Scaling factor: 1
200
Info
Interior temperature of CU
No transfer COM MOT Scaling factor: 1
Parameter reference
Parameter list | C00057
Data type: UNSIGNED_32
Index: 24518 = 5FC6
d h
Data type: INTEGER_32
Index: 24517 = 5FC5
d h
Data type: UNSIGNED_32
Index: 24516 = 5FC4
d h
Data type: INTEGER_16
Index: 24514 = 5FC2
d h
Data type: INTEGER_16
Index: 24513 = 5FC1
d h
725