Protection - Lenze L-force HighLine C 8400 Series Reference Manual

2.4 Device access protection
This function extension is available from version 06.00.00!
Various tasks can be carried out via the functions of the device access protection:
Password protection

– Only authorised persons (who know the password) are permitted to read/change all
parameters of the controller.
– Unauthorised persons (who do not know the password) are only granted access to
the max. 32 parameters of the user menu.
Device personalisation

– Only controllers and memory modules which are personalised with a specific binding
ID can be used for the system.

Note!
If password protection/device personalisation is used:
• Let the end customer know that Lenze can only provide limited service in case
of devices with access protection.
• Lenze cannot modify e.g. a replacement device via special access to make it
work with a personalised memory module.
• The keypad does not support the alpha-numeric entry of a password, thus the
keypad cannot be used for entry.
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
8400 HighLine C | Reference manual
Introduction: Parameterising the controller
L
Device access protection
47