Lenze L-force HighLine C 8400 Series Reference Manual page 743

C00158
Parameter | Name:
C00158 | Cause of controller inhibit
Bit coded display of the cause/source of the controller inhibit
Display area
(min. hex value | max. hex value)
0x0000
Value is bit-coded:
Bit 0 Terminal controller enable
Bit 1 CAN control word
Bit 2 MCI control word
Bit 3 SwitchOn
Bit 4 Application
Bit 5 Device command
Bit 6 Error response
Bit 7 Internal signal
Bit 8 Reserved
Bit 9 Reserved
Bit 10 AutoStartLock
Bit 11 Motor parameter identification
Bit 12 Automatic brake operation
Bit 13 DCB-IMP
Bit 14 Reserved
Bit 15 Reserved
Read access
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Write access CINH PLC STOP
L
8400 HighLine C | Reference manual
0xFFFF
No transfer COM MOT
Parameter reference
Parameter list | C00158
Data type: UNSIGNED_16
Index: 24417 = 5F61
d h
743