Lenze L-force HighLine C 8400 Series Reference Manual page 810

8400 HighLine C | Reference manual
Parameter reference
Parameter list | C00592
C00592
Parameter | Name:
C00592 | Resp. to CAN bus connection
Configuration of monitoring of the CAN interface (group 1)
Selection list
Subcodes
C00592/1
C00592/2
C00592/3
C00592/4
C00592/5
Read access
C00593
Parameter | Name:
C00593 | Resp. to CANx_IN monitoring
Configuration of monitoring of the CAN interface (group 2)
Selection list
Subcodes
C00593/1
C00593/2
C00593/3
Read access
810
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
0 No Reaction
1 Fault
2 Trouble
3 TroubleQuickStop
4 WarningLocked
5 Warning
6 Information
Lenze setting
0: No Reaction
0: No Reaction
0: No Reaction
0: No Reaction
0: No Reaction
Write access CINH PLC STOP
0 No Reaction
1 Fault
2 Trouble
3 TroubleQuickStop
4 WarningLocked
5 Warning
6 Information
Lenze setting
0: No Reaction
0: No Reaction
0: No Reaction
Write access CINH PLC STOP
L
Info
Response to incorrect telegram for CAN communication
Response to "BusOff" (bus system switched off)
Response to warnings of the CAN controller
Response to communication stop of a CAN bus node
Response to an event in the case of monitoring via
heartbeat protocol
No transfer COM MOT Scaling factor: 1
Info
Response if the monitoring time set in
reception of the PDO CAN1_IN is exceeded.
Response if the monitoring time set in
reception of the PDO CAN2_IN is exceeded.
Response if the monitoring time set in
reception of the PDO CAN3_IN is exceeded.
No transfer COM MOT Scaling factor: 1
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011
Data type: UNSIGNED_8
Index: 23983 = 5DAF
d h
System bus "CAN on board"
Data type: UNSIGNED_8
Index: 23982 = 5DAE
d h
System bus "CAN on board"
C00357/1 for the
C00357/2 for the
C00357/3 for the