How to diagnose a drive with the »Engineer«:
1. In the Project view, select the 8400 HighLine controller.
2. Click the
connection to the controller.
3. Select the Diagnostics tab.
• With an online connection, the Diagnostics tab displays current status
information about the controller.
Tip!
The online connection to the controller can be established via the following device
interfaces:
• CAN interface X1
Diagnostics via the
• X6 diagnostic interface
We recommend this diagnostic connection when the X1 CAN interface is used
for process communication.
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
8400 HighLine C | Reference manual
icon or execute the OnlineGo online command to establish an online
System bus "CAN on board"
L
Diagnostics & error management
Drive diagnostics with the »Engineer«
( 613)
563