Lenze L-force HighLine C 8400 Series Reference Manual page 802

8400 HighLine C | Reference manual
Parameter reference
Parameter list | C00495
C00495
Parameter | Name:
C00495 | Speed sensor selection
Selection of the feedback system for the actual speed for motor control and display
Selection list
(Lenze setting printed in bold)
Read access
C00496
Parameter | Name:
C00496 | Encoder evaluation method DigIn12
Selection list
(Lenze setting printed in bold)
Read access
C00497
Parameter | Name:
C00497 | Nact filter time constant
From version 03.00.00
Setting range
(min. value | unit | max. value)
0.0
Subcodes
C00497/1
C00497/2
Read access
C00505
Parameter | Name:
C00505 | Password data
From version 06.00.00
Subcodes
C00505/1
C00505/2
C00505/3
Read access
802
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
0 No sensor
1 Sensor signal FreqIn12
2 Encoder signal FreqIn67
Write access CINH PLC STOP
0 High-resolution encoders
1 Low-resolution encoder (StateLine)
2 Comb. encoder procedure
3 Edge-counting procedure
Write access CINH PLC STOP
ms
Lenze setting
1.0 ms
1.0 ms
Write access CINH PLC STOP
Lenze setting
Write access CINH PLC-STOP
L
Info
No sensor available for the actual speed detection
Speed sensor signal is fed via the digital DI1 and DI2
inputs
Speed encoder signal is fed via digital inputs DI6 and DI7
No transfer COM MOT Scaling factor: 1
Info
High-precision procedure for high-resolution encoders
(>=512 increments)
High-precision procedure for low-resolution encoders
(<=128 increments)
Combination of the first two procedures as a function of
the speed (recommended procedure)
Simple edge counting procedure with adjustable
scanning time (C00425)
No transfer COM MOT Scaling factor: 1
500.0
Info
FreqIn12: Encoder filter time
FreqIn67: Encoder filter time
No transfer COM MOT Scaling factor: 10
Info
MasterPin
Binding ID
Password
No transfer COM MOT Character length: 16
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011
Data type: UNSIGNED_8
Index: 24080 = 5E10
d h
Encoder/feedback system
Data type: UNSIGNED_8
Index: 24079 = 5E0F
d h
Encoder/feedback system
Data type: UNSIGNED_16
Index: 24078 = 5E0E
d h
Encoder/feedback system
Data type: VISIBLE_STRING
Index: 24070 = 5E06
d h
Device access protection