8400 HighLine C | Reference manual
Motor control (MCTRL)
Encoder/feedback system
How to get to the parameterisation dialog of the encoder/feedback system:
1. »Engineer« Go to the Project view and select the 8400 HighLine controller.
2. Go to Workspace and change to the Application parameters tab.
3. Go to the Overview dialog level and click the following button:
4. Go to the Overview Motor data dialog level and click the Encoder/Feedback
system... button.
Parameterisation dialog in the »Engineer«
270
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
L
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011