Integrated Technology Applications - Lenze L-force HighLine C 8400 Series Reference Manual

8400 HighLine C | Reference manual
Introduction: Parameterising the controller

Integrated technology applications

2.1 Integrated technology applications
The following technology applications integrated in the drive controller 8400 HighLine
provide the main signal flow for the implementation of a general or a special drive
solution:

Note!
Please note that the StateLine, HighLine and TopLine device types differ with
regard to the number, functional range, and flexibility of the technology
applications offered.

Detailed information on each technology application can be found in the main
chapter entitled
34
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Technology application "Actuating drive speed"
This preset technology application serves to solve speed-controlled drive
tasks, e.g. conveyor drives (interconnected), extruders, test benches,
vibrators, travelling drives, presses, machining systems, metering units.
Technology application "Table positioning"
This technology application serves to solve position-controlled drive tasks
which are normally controlled by a higher-level control via a fieldbus, e.g.
transport facilities, rotary tables, storage and retrieval units, feed drives,
metering units, hoists.
Note: An external sequence control is required for this TA!
"Switch-off positioning" technology application
This technology application available
speed-controlled drive tasks for which a pre-switch off or stop at certain
positions is required, e.g. roller conveyors and conveying belts. The pre-switch
off is implemented by the connection of switch-off sensors.
"Technology
L
from version 04.00.00
applications".
( 358)
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011
serves to solve