Technology Applications - Lenze L-force HighLine C 8400 Series Reference Manual

8400 HighLine C | Reference manual

Technology applications

7 Technology applications
This chapter describes the handling and the functional range of the technology
applications available for the 8400 HighLine drive controller.

Note!
Please note that the StateLine, HighLine and TopLine device types differ with
regard to the number, functional range, and flexibility of the technology
applications offered.
Related topics:
Integrated technology applications
Commissioning of the "Actuating drive speed" technology application
Commissioning of the "Table positioning" technology application
Commissioning of the "Switch-off positioning" technology application
358
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Technology application "Actuating drive speed"
This technology application preset in
drive tasks, e.g. conveyor drives (interconnected), extruders, test benches,
vibrators, travelling drives, presses, machine tools, dosing systems.
TA "Actuating drive speed"
Technology application "Table positioning"
This technology application serves to solve position-controlled drive tasks
which are normally controlled by a higher-level control via a fieldbus, e.g.
transport facilities, rotary tables, storage and retrieval units, feed drives,
metering units, hoists.
Note: An external sequence control is required for this TA!
TA "Table positioning"
"Switch-off positioning" technology application
This technology application available
speed-controlled drive tasks for which a pre-switch off or stop at certain
positions is required, e.g. roller conveyors and conveying belts. The pre-switch
off is implemented by the connection of switch-off sensors.
TA "Switch-off positioning"
L
C00005 serves to solve speed-controlled
( 360)
( 387)
from version 04.00.00
( 417)
( 34)
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011
serves to solve
( 59)
( 67)
( 82)