Lenze L-force HighLine C 8400 Series Reference Manual page 608

8400 HighLine C | Reference manual
Diagnostics & error management
Error messages of the operating system
US05: User error 5 [xx.0984.00001]
Response (Lenze setting printed in bold)
0: No Reaction
Cause
User error 5 has been tripped via the bSetError1 input of
the LS_SetError_2
US06: User error 6 [xx.0985.00002]
Response (Lenze setting printed in bold)
0: No Reaction
Cause
User error 6 has been tripped via the bSetError2 input of
the LS_SetError_2
US07: User error 7 [xx.0986.00003]
Response (Lenze setting printed in bold)
0: No Reaction
Cause
User error 7 has been tripped via the bSetError3 input of
the LS_SetError_2
US08: User error 8 [xx.0987.00004]
Response (Lenze setting printed in bold)
0: No Reaction
Cause
User error 8 has been tripped via the bSetError4 input of
the LS_SetError_2
608
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
1: Fault 2: Trouble 3: TroubleQuickStop
system block.
1: Fault 2: Trouble 3: TroubleQuickStop
system block.
1: Fault 2: Trouble 3: TroubleQuickStop
system block.
1: Fault 2: Trouble 3: TroubleQuickStop
system block.
L
Setting: C00581/5 ( Adjustable response)
4: WarningLocked 5: Warning 6: Information
Remedy
User-defined.
Setting: C00581/6 ( Adjustable response)
4: WarningLocked 5: Warning 6: Information
Remedy
User-defined.
Setting: C00581/7 ( Adjustable response)
4: WarningLocked 5: Warning 6: Information
Remedy
User-defined.
Setting: C00581/8 ( Adjustable response)
4: WarningLocked 5: Warning 6: Information
Remedy
User-defined.
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011