Process Data Transfer - Lenze L-force HighLine C 8400 Series Reference Manual

Inverter drives
Hide thumbs Also See for L-force HighLine C 8400 Series:
Table of Contents

Advertisement

8400 HighLine C | Reference manual
System bus "CAN on board"

Process data transfer

10.8
Process data transfer
[10-5] PDO data transfer from / to the higher-level host system
"BaseLine C" versions have two separate process channels (PDO1 and PDO2) and from the
"StateLine" version three separate process data channels (PDO1 ... PDO3) for process data
transfer.
Definitions
 Process data telegrams between the host system and the devices are distinguished in
terms of direction as follows:
– Process data telegrams to the device (RPDO)
– Process data telegrams from the device (TPDO)
 The CANopen process data objects are designated as seen from the node's view:
– Receive PDOs (RPDOx): Process data object received by a node
– Transmit PDOs (TPDOx): Process data object sent by a node
Note!
Data can only be exchanged via process data objects if the status is
"Operational"!
Communication phases/network management
628
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
L
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011
( 624)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

L-force highline e84avhc series

Table of Contents