Lenze L-force HighLine C 8400 Series Reference Manual page 753

C00178
Parameter | Name:
C00178 | Elapsed-hour meter
Display of operating hours in seconds
Display range
(min. value | unit | max. value)
0
Read access
C00179
Parameter | Name:
C00179 | Power-on time meter
Display of the power-on time in seconds
Display range
(min. value | unit | max. value)
0
Read access
C00180
Parameter | Name:
C00180 | Running time
Display of various running times in seconds
Display range
(min. value | unit | max. value)
0
Subcodes
C00180/1
C00180/2
C00180/3
Read access
C00181
Parameter | Name:
C00181 | Time settings
From version 06.00.00
Time for device search function (optical location)
Setting range
(min. value | unit | max. value)
0
Subcodes
C00181/1
Read access
C00182
Parameter | Name:
C00182 | L_NSet_1: S-ramp time PT1
FB L_NSet_1: PT1 S-ramp time for the main setpoint ramp function generator
• Only effective with activated ramp rounding
Setting range
(min. value | unit | max. value)
0.01
Read access
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
s 2147483647
Write access CINH PLC STOP
s 2147483647
Write access CINH PLC STOP
s 2147483647
Write access CINH PLC STOP
s
Lenze setting
5 s
Write access CINH PLC STOP
s
Write access CINH PLC STOP
L
8400 HighLine C | Reference manual
No transfer COM MOT Scaling factor: 1
No transfer COM MOT Scaling factor: 1
Info
Running time - control card
Running time - heatsink fan
Running time - internal fan
No transfer COM MOT Scaling factor: 1
6000
Info
Time - device search function
No transfer COM MOT Scaling factor: 1
(C00134 = "1").
Lenze setting
50.00 20.00 s
No transfer COM MOT Scaling factor: 100
Parameter reference
Parameter list | C00178
Data type: UNSIGNED_32
Index: 24397 = 5F4D
d h
Data type: UNSIGNED_32
Index: 24396 = 5F4C
d h
Data type: UNSIGNED_32
Index: 24395 = 5F4B
d h
Data type: UNSIGNED_16
Index: 24394 = 5F4A
d h
Device search function
Data type: INTEGER_16
Index: 24393 = 5F49
d h
753