Reset Error; Delete Logbook - Lenze L-force HighLine C 8400 Series Reference Manual

4.1.6

Reset error

The C00002/19
if the error cause has been eliminated and thus the error is no longer pending.
 After the reset (acknowledgement) of the current error, further errors may be pending
which must also be reset.
 The status-determining error is displayed in C00168.
 The current error is displayed in C00170.

Tip!
An error message can also be acknowledged by activating the Reset error button in
the Diagnostics tab.
Detailed information on error messages can be found in the
management" chapter.
4.1.7

Delete logbook

The C00002/21

Tip!
Click the Logbook button in the Diagnostics tab to display the logbook in the
»Engineer«.
In the Logbook dialog box, it is also possible to delete all logbook entries by clicking
the Delete button.
Detailed information on the logbook can be found in the
management" chapter.
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
= "1: On / start" device command acknowledges an existing error message
( 559)
= "1: On / start" device command deletes all logbook entries.
( 559)
L
8400 HighLine C | Reference manual
Device control (DCTRL)
Device commands (C00002/x)
"Diagnostics & error
"Diagnostics & error
109