Modes - Lenze L-force HighLine C 8400 Series Reference Manual

7.2.3 Terminal assignment of the control modes
The following comparison provides information about which inputs/outputs of the application block LA_NCtrl are interconnected
to the digital and analog input/output terminals of the drive controller in the different control modes.
10: Terminals 0 12:
Digital input terminals
X5/RFR
X5/DI1 Fixed setpoint 1/3
bJogSpeed1
X5/DI2 Fixed setpoint 2/3
bJogSpeed2
X5/DI3 Activate manual DC- Quick stop
injection braking (DCB) bSetQuickstop
bSetDCBrake
X5/DI4 Change of direction of rotation
bSetSpeedCcw
X5/DI5 ... DI7 -
Analog input terminals
X3/A1U, A1I
10 V ≡ 100 % reference speed (C00011)
X3/A2U, A2I -
Digital output terminals
X4/DO1
X4/DO2 ... DO3 -
X107/BD1, BD2 -
X101/COM, NO
Analog output terminals
X3/O1U
X3/O1I -
X3/O2U
X3/O2I
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Terminals 2 14: Terminals 11 16: Terminal 16
Controller enable / Reset of error message
Change of direction of Fixed setpoint 1/3
rotation bJogSpeed1
bSetSpeedCcw
Activate manual DC- Fixed setpoint 2/3
injection braking (DCB) bJogSpeed2
bSetDCBrake
Motor potentiometer: CW rotation quick stop
Increase speed bRLQCw
bMPotUp
Motor potentiometer: CCW rotation quick stop
Decrease speed bRLQCcw
bMPotDown
- -
Main speed setpoint
nMainSetValue_a
- -
- -
- -
10 V ≡ 100 % reference speed (C00011)
- -
Control mode (C00007)
20: Keypad 21:
bFailReset
- -
- -
- -
- -
- - -
- -
- - -
Status "Drive is ready"
bDriveReady
- - -
- - -
Status "Error is pending"
bDriveFail
Actual speed value
nMotorSpeedAct_a
- - -
PC 30: CAN 40: MCI
Quick stop
bSetQuickstop
- -
- -
- -
- -
Additional speed setpoint
nAuxSetValue_a
10 V ≡ 100 % reference speed (C00011)
- -
- -
- -
- -