Lenze L-force HighLine C 8400 Series Reference Manual page 846

8400 HighLine C | Reference manual
Parameter reference
Parameter list | C00750
C00750
Parameter | Name:
C00750 | Select. of BU oscillos. channels
This code is for device-internal use only and must not be written to by the user!
C00751
Parameter | Name:
C00751 | Oscilloscope data memory
This code is for device-internal use only and must not be written to by the user!
C00753
Parameter | Name:
C00753 | Oscilloscope data memory octet string
This code is for device-internal use only and must not be written to by the user!
C00760
Parameter | Name:
C00760 | LA_SwitchPos: Analog connection list
Connection parameters for "Switch-off positioning" application: 16-bi inputs
• Selection of the 16 bit output signals to be connected to the 16 bit input signals
• The selection list contains all 16 bit output signals which can be assigned to the 16 bit inputs displayed by the
subcodes.
Selection list
See selection list - analog signals
Subcodes
C00760/1
C00760/2
C00760/3
C00760/4
C00760/5
C00760/6
C00760/7
C00760/8
C00760/9
C00760/10
C00760/11
C00760/12
C00760/13
C00760/14
846
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Lenze setting
0: Not connected
0: Not connected
0: Not connected
0: Not connected
0: Not connected
0: Not connected
0: Not connected
0: Not connected
0: Not connected
0: Not connected
0: Not connected
0: Not connected
0: Not connected
0: Not connected
L
Info
LA_SwitchPos: wCANDriveControl
(input for control word from CAN to device control)
LA_SwitchPos: wMCIDriveControl
(input for control word from communication interface to
device control)
LA_SwitchPos: nVoltageAdd_a
(input for additive voltage impression)
LA_SwitchPos: nBoost_a
(input for additional setpoint for the motor voltage at
speed = 0)
LA_SwitchPos: nPWMAngleOffset
(input for additional offset for the electrical angle of
rotation)
LA_SwitchPos: nTorqueMotLim_a
(input for maximum torque in motor mode)
LA_SwitchPos: nTorqueGenLim_a
(input for maximum torque in generator mode)
LA_SwitchPos: nMainSetValue_a
(input for main speed setpoint)
LA_SwitchPos: nAuxSetValue_a
(input for additional speed setpoint)
LA_SwitchPos: nGPAnalogSwitchIn1_a
(input for analog-value selector analog signal 1)
LA_SwitchPos: nGPAnalogSwitchIn2_a
(input for analog-value selector analog signal 2)
LA_SwitchPos: nGPArithmetikIn1_a
(input for arithmetic function analog signal 1)
LA_SwitchPos: nGPArithmetikIn2_a
(input for arithmetic function analog signal 2)
LA_SwitchPos: nGPMulDivIn_a
(input for analog signal for multiplication/division)
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011
Data type: UNSIGNED_8
Index: 23825 = 5D11
d h
Data type: UNSIGNED_32
Index: 23824 = 5D10
d h
Data type: OCTET_STRING
Index: 23822 = 5D0E
d h
Data type: UNSIGNED_16
Index: 23815 = 5D07
d h