Smooth Start And Quick Stop Of The Drive - Lenze L-force HighLine C 8400 Series Reference Manual

8.7.1.2

Smooth start and quick stop of the drive

ManJogPos
C01231/1: Manual jog: Speed 1
C01232/1: Manual jog: acceleration
C01232/2: Manual jog: deceleration
C01233/1: Manual jog: S-ramp time
[8-21] Example: Smooth start and quick stop

Tip!
Rapid deceleration (C01232/2) reduces the time from releasing of the "jog button"
to actual stopping of the drive, with the result that it is easier to position the drive
"by sight" and the desired stop position is not passed.
8.7.1.3 Second speed
ManJogPos
ManExecute2ndSpeed
C01231/1: Manual jog: Speed 1
C01231/2: Manual jog: Speed 2
[8-22] Example: Changing over to second speed
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
n
Œ


TRUE
FALSE
n
Œ

TRUE
FALSE
TRUE
FALSE
L
8400 HighLine C | Reference manual
Basic drive functions (MCK)
 For accelerating and decelerating,
different values can be set in
Ž
C01232/1...2
starting and quick stopping of the
drive can be implemented.
t
 In order to reduce jerking, the two
ramps can be set in such a way that
they are s-shaped. This is done by
entering a relative S-ramp time in
t
C01233/1.
 By setting control bit 6
(ManExecute2ndSpeed) in
control word, you can changeover
to a second speed (C01231/2)
during traversing.
t
t
t
Manual jog
so that smooth
theMCK
513