Lenze L-force HighLine C 8400 Series Reference Manual page 318

8400 HighLine C | Reference manual
I/O terminals
Digital input terminals
Internal interfaces to the application
 Relevant inputs at
Input
Frequency input DI1/DI2
bPosIn12_Load
(from version 06.00.00)
dnPosIn12_Set_p
(from version 06.00.00)
 Relevant outputs at the
Output
Frequency input DI1/DI2
nFreqIn12_a
nFreqIn12_v
dnPosIn12_p
(from version 06.00.00)
bPosIn12_State
(from version 06.00.00)
Frequency input DI6/DI7
nFreqIn67_a
nFreqIn67_v
Related topics:
Output of the encoder position of the DI1/DI2 frequency input
Using DI1(6) and DI2(7) as digital inputs
Using DI1(6) as counting input
Internal interfaces | System block "LS_DigitalInput"
318
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
LS_DigitalInput
Information/possible settings
Data type
Load angle integrator with starting value and reset status signal
BOOL
TRUE Angle integrator is loaded with the value at dnPosIn12_Set_p and
bPosIn12_State is reset to FALSE.
Starting value for angle integrator
DINT
LS_DigitalInput
Value/meaning
Data type
Output frequency as scaled analog signal in [%]
C00446/1 | INT
Output frequency as speed signal in [inc/ms]
C00445/1 | INT
Angle output signal
• 65536 [incr.] ≡ 1 encoder revolution
DINT
• Overflow is possible (display via bPosIn12_State)
Status signal "Overflow occurred/distance processed"
• Status signal can be reset via bPosIn12_Load.
BOOL
TRUE Overflow has occurred or distance is processed.
Output frequency as scaled analog signal in [%]
C00446/2 | INT
Output frequency as speed signal in [inc/ms]
C00445/2 | INT
( 319)
L
system block:
system block:
( 313)
( 323)
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011
( 326)