Explanation of the automatic DC-injection braking function by means of two examples
0
1
2
3
4
[5-24] Example 1: Signal characteristic for automatic DC-injection braking of a drive without speed feedback
0
1
2
3
4
[5-25] Example 2: Signal characteristic for automatic DC-injection braking of a drive with speed feedback
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
8400 HighLine C | Reference manual
C00019
C00036
C0107
C00019
C00036
L
Motor control (MCTRL)
Parameterisable additional functions
The
motor
rotates
specified speed. The current
adjusts itself to the load, see .
The DC braking current set in
C00036
is injected.
After the hold time (C00106)
has expired, a pulse inhibit is set.
Speed setpoint
Actual speed value of the motor
Output current of the controller
Pulse inhibit
DC-injection braking is active
The motor rotates at the
selected speed. The resulting
current depends on the load, see
.
The DC braking current set in
C00036
is injected.
The actual speed value of the
motor follows the speed setpoint.
The resulting current depends on
the load.
Speed setpoint
Actual speed value of the motor
Output current of the controller
Pulse inhibit
DC-injection braking is active
at
a
257