1 About this documentation
Danger!
The controller is a source of danger which may lead to death or severe injury of
persons.
To protect yourself and others against these dangers, observe the safety
instructions before switching on the controller.
Please read the safety instructions provided in the 8400 mounting instructions
and in the 8400 hardware manual. Both documents are supplied with the
controller.
Target group
This documentation is directed to all persons who would like to parameterise, configure
and diagnose the 8400 HighLine with the Lenze L-force »Engineer« engineering software
and the keypad X400.
Validity
The information in this documentation are valid for the following standard devices:
Product range
8400 HighLine C
Screenshots/application examples
All screenshots provided in this documentation are application examples. Depending on
the software version of the controller and the version of the installed »Engineer« software,
the screenshots in this documentation may differ from the representation in the
»Engineer«.
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
8400 HighLine C | Reference manual
Type designation
from software version
E84AVHCxxxxx
01.00
About this documentation