Commissioning; Parameter Setting Using The Keypad - Lenze Starttec E71MM402 Mounting Instructions

Show/Hide Bookmarks

Commissioning

7

Parameter setting using the keypad

The keypad is available as accessory. A full description can be obtained from the information included
in the keypad delivery.
Menu structure
All parameters for controller setting or monitoring are saved in codes under the menus User and all.
The codes have numbers 6 and are abbreviated in the text with a "C" before the number. Some codes
store the parameters in numerical "subcodes" 7 to ensure that the parameter setting is clearly struc-
tured (example: C0517 menu User).
The menu User
l
– is active after every mains switching or keypad attachment during operation.
– contains all codes required for a standard application (Lenze setting).
– can be modified as required under C0517.
The menu all
l
– contains all codes.
– shows a list of all codes in ascending order.
The change between User and all and how to change parameters in the codes is described
l
on the following pages.
26
0
Function keys
1
Status display
2
Bargraph display
3
Function bar 1
4
Function bar 2
5
Parameter set
6
Code number
7
Subcode number
8
Parameter value with unit
EDK71MMXXX-020 DE/EN/FR 1.0
Changes Changes
possible possible
when lamp
is blinking is blinking
L