Using Di1(6) And Di2(7) As Digital Inputs - Lenze L-force HighLine C 8400 Series Reference Manual

6.1.1.1

Using DI1(6) and DI2(7) as digital inputs

Function assignment 0: DI1(6)=In / DI2(7)=In
With this setting in
digital inputs.
 For each digital input, the debounce time (C02830/1...7) and the terminal polarity
(C00114) can be set individually.
 The current terminal level at the input of the internal processing function is shown in
C00443/1
 The output level for the application is shown in
Internal interfaces to the application
 Relevant outputs at the
Output
DIS code | data type
bIn1 ... bIn7
Related topics:
Using DI1(6) and DI2(7) as frequency inputs
Using DI1(6) as counting input
Internal interfaces | System block "LS_DigitalInput"
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
C00115 , the digital input terminals have been configured as "normal"
in bit-coded form.
LS_DigitalInput
Value/meaning
Digital input DI1 ... DI7
C00443/2 | BOOL
( 319)
L
8400 HighLine C | Reference manual
Digital input terminals
C00443/2 in bit-coded form.
system block:
( 314)
( 323)
I/O terminals
313