Digital Input Terminals - Lenze L-force HighLine C 8400 Series Reference Manual

8400 HighLine C | Reference manual
I/O terminals

Digital input terminals

6.1 Digital input terminals
The drive controller has 7 parameterisable input terminals (DI1 ... DI7) for detecting digital
signals. The RFR control input for enabling the controller is permanently connected to the
device control unit.
Parameterisation dialog in the »Engineer«:
Button
310
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Function
Indicates the polarity of the input is HIGH active.
The polarity can be changed from HIGH active to LOW active by clicking this button.
Indicates that the polarity of the input is LOW active.
The polarity can be changed from LOW active to HIGH active by clicking this button.
Open the parameterising dialog for assigning application inputs to the digital input.
Changing the terminal assignment with the »Engineer« ( 355)
L
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011