Lenze L-force HighLine C 8400 Series Reference Manual page 728

8400 HighLine C | Reference manual
Parameter reference
Parameter list | C00075
C00075
Parameter | Name:
C00075 | Vp current controller
Gain factor Vp of the current controller for servo control (SC) and certain inverter functions (parameter
identification, flying restart circuit)
• After the motor to be used has been selected from the motor catalogue, the suitable value can be entered
automatically.
Setting range
(min. value | unit | max. value)
0.00
Read access
C00076
Parameter | Name:
C00076 | Ti current controller
Reset time Ti of the current controller for servo control (SC) and certain inverter functions (parameter identification,
flying restart circuit)
• After the motor to be used has been selected from the motor catalogue, the suitable value can be entered
automatically.
Setting range
(min. value | unit | max. value)
0.00
Read access
C00077
Parameter | Name:
C00077 | SC: Vp field controller
Gain factor Vp of the field controller for servo control (SC)
• After the motor to be used has been selected from the motor catalogue, the suitable value can be entered
automatically.
Setting range
(min. value | unit | max. value)
0.00
Read access
C00078
Parameter | Name:
C00078 | SC: Tn field controller
Reset time Tn of the field controller for servo control (SC)
• After the motor to be used has been selected from the motor catalogue, the suitable value can be entered
automatically.
Setting range
(min. value | unit | max. value)
0.1
Read access
728
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
V/A
Write access CINH PLC STOP
ms
Write access CINH PLC STOP
Write access CINH PLC STOP
ms
Write access CINH PLC STOP
L
Lenze setting
500.00 7.00 V/A
No transfer COM MOT Scaling factor: 100
Lenze setting
500.00 10.61 ms
No transfer COM MOT Scaling factor: 100
Lenze setting
500.00 12.80
No transfer COM MOT Scaling factor: 100
Lenze setting
6000.0 256.0 ms
No transfer COM MOT Scaling factor: 10
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011
Data type: UNSIGNED_16
Index: 24500 = 5FB4
d h
Data type: UNSIGNED_16
Index: 24499 = 5FB3
d h
Data type: UNSIGNED_16
Index: 24498 = 5FB2
d h
Data type: UNSIGNED_16
Index: 24497 = 5FB1
d h