Lenze L-force HighLine C 8400 Series Reference Manual page 701

After successful completion
... the bDone output is set to TRUE.
 The bDone output is automatically reset to FALSE if writing via bExecute is activated
again.
In the event of an error
... the bDone output remains set to FALSE and the bFail output is set to TRUE.
C01083

which the error occurred (in connection with the selected value set).
 If several errors occur at the same time, only the first incorrect list entry will be
displayed. Hence, after elimination of the displayed error and another activation, more
errors may be displayed.
 The parameter list will always be processed from beginning to end, even if errors occur
in the meantime.
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
displays an error status and
L
8400 HighLine C | Reference manual
Activating the writing of the parameters
C01084 displays the number of the list entry at
Parameter change-over
701