Lenze L-force HighLine C 8400 Series Reference Manual page 950

8400 HighLine C | Reference manual
Parameter reference
Parameter list | C01242
Parameter | Name:
C01241 | MCK: Status word
Bit 13 HomPosAvailable
Bit 14 Pos. SW-Limit Detected
Bit 15 Neg. SW-Limit Detected
Bit 16 DwellTime
Bit 17 InTarget
Bit 18 PosDone
Bit 19 Reserved
Bit 20 ActPosMode_Bit00
Bit 21 ActPosMode_Bit01
Bit 22 ActPosMode_Bit02
Bit 23 ActPosMode_Bit03
Bit 24 ActProfileNo_Bit00
Bit 25 ActProfileNo_Bit01
Bit 26 ActProfileNo_Bit02
Bit 27 ActProfileNo_Bit03
Bit 28 ActProfileNo_Bit04
Bit 29 ActProfileNo_Bit05
Bit 30 ActProfileNo_Bit06
Bit 31 ActProfileNo_Bit07
Read access
C01242
Parameter | Name:
C01242 | MCK: Current pos profile number
Display of the current profile number of the active profile in the "Positioning" mode
Display range
(min. value | unit | max. value)
0
Read access
950
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Write access CINH PLC STOP
Write access CINH PLC STOP
L
Status bit - home position known
• "1" ≡ The home position has been detected and is
known in the drive.
Status bit - positive software limit detected
• "1" ≡ Positive software limit position overtravelled.
Status bit - negative software limit detected
• "1" ≡ Negative software limit position overtravelled.
Status bit - transient effects in target position active
• "1" ≡ Dwell time after reaching the setpoint position
is active.
Status bit - actual position is in the target window
• "1" ≡ Dwell time has expired and current actual
position is in the set target window.
Status bit - positioning process completed
• "1" ≡ Positioning profile has been completed in the
"Positioning" mode. Setpoint position is in target.
Active positioning mode - status bit 0
Active positioning mode - status bit 1
Active positioning mode - status bit 2
Active positioning mode - status bit 3
Active positioning profile - status bit 0
Active positioning profile - status bit 1
Active positioning profile - status bit 2
Active positioning profile - status bit 3
Active positioning profile - status bit 4
Active positioning profile - status bit 5
Active positioning profile - status bit 6
Active positioning profile - status bit 7
No transfer COM MOT
255
No transfer COM MOT Scaling factor: 1
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011
Data type: UNSIGNED_32
Index: 23334 = 5B26
d h
Data type: UNSIGNED_8
Index: 23333 = 5B25
d h
Positioning