2.2 Selection Of The Appropriate Commissioning Tool - Lenze L-force HighLine C 8400 Series Reference Manual

2.2 Selection of the appropriate commissioning tool

There are several possibilities for commissioning the 8400 HighLine controller:
Commissioning with keypad X400 (diagnosis terminal X400)
The keypad is an alternative to the PC for the local operation,
parameterisation, and diagnostics in a simple manner. The keypad is
especially suitable for test or demonstration purposes and if only a few
parameters have to be adapted.
Commissioning with PC and L-force »EASY Starter«
The L-force »EASY Starter« is a Lenze tool for easy online diagnostics,
parameter setting and commissioning of the controller.
Commissioning with PC and L-force »Engineer«
The L-force »Engineer« is a Lenze engineering software for parameter setting
across all devices, configuring and diagnosing individual components (as for
instance controllers, industrial PCs, motors, I/O systems) and machine control
systems.
For communication between PC and controller, the USB diagnostic adapter can be
used (see the following subchapter).
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
8400 HighLine C | Reference manual
Introduction: Parameterising the controller
Selection of the appropriate commissioning tool
.