System Block "Ls_Seterror_2 - Lenze L-force HighLine C 8400 Series Reference Manual

9.11

System block "LS_SetError_2"

This system block is used for error handling within the application.
 The application can trip up to four different user error messages with parameterisable
error IDs and error responses via the four boolean inputs.
 If several inputs are set to TRUE at the same time, the input with the lowest number
will trip the error message.
Inputs
Identifier
bSetError1
bSetError2
bSetError3
bSetError4
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Information/possible settings
Data type
Input for tripping "US05: User error
• Error subject number: 984
BOOL
• Error number: (C00581/5
Input for tripping "US06: User error
BOOL • Error subject number: 985
• Error number: (C00581/6
Input for tripping "US07: User error
• Error subject number: 986
BOOL
• Error number: (C00581/7
Input for tripping "US08: User error
• Error subject number: 987
BOOL
• Error number: (C00581/8
L
8400 HighLine C | Reference manual
Diagnostics & error management
System block "LS_SetError_2"
5"
x 0x0400000) + (984 x 0x10000) + (C00161/5)
6"
x 0x0400000) + (985 x 0x10000) + (C00161/6)
7"
x 0x0400000) + (986 x 0x10000) + (C00161/7)
8"
x 0x0400000) + (987 x 0x10000) + (C00161/8)
611