Device Control (Dctrl) - Lenze L-force HighLine C 8400 Series Reference Manual

4

Device control (DCTRL)

This chapter provides information on internal device control as well as the device
commands which can be executed via the subcodes of C00002.
 The device control causes the controller to take defined device statuses.
 The device control provides a multitude of status information in many ways:
– Visually via the
– As text messages in the Logbook.
– As process signals via the outputs of the
– Via diagnostic / display parameters which are included in the »Engineer« parameter
list as well as in the Diagnostics category in the keypad.

Note!
The device statuses of the controller are based on the operating statuses of the
CiA402 standard.
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
8400 HighLine C | Reference manual
LED status displays on the front of the controller.
( 568)
Device state machine and device statuses
L
Device control (DCTRL)
LS_DriveInterface system block.
( 561)
( 125)
( 111)
99