Display System-Guard State - H3C S3100 Series Command Manual

Table 4-1 Description on the fields of display system-guard attack-record
Target No
Range
Packet type
Port
MAC address
IP address
Alive time

display system-guard state

Syntax
display system-guard state
View
Any view
Parameter
None
Description
Use the display system-guard state command to display the state of the system-guard feature.
Related command: system-guard enable, system-guard detect-threshold, and system-guard
timer-interval.
Example
# Display the state of the system-guard feature.
<Sysname> display system-guard state
System-guard Status: Enabled
Permitted Interfaces:
Ethernet1/0/1
Detect Threshold: 201
Isolated Time: 20
Attack Number: 0
Field
Number of the attack record
Control range of the attack
Type of the attack packet
Number of the port being attacked
Source MAC address of the attack packet
Source IP address of the attack packet
Remaining time during which attack packets of the type are
isolated
4-2
Description