Display Voice Vlan State - H3C S5120-SI Series Command Reference Manual

0060-b900-0000
00e0-7500-0000
00e0-bb00-0000
Table 2-1 display voice vlan oui command output description
Field
Oui Address
Mask
Description

display voice vlan state

Syntax
display voice vlan state
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display voice vlan state command to display voice VLAN configuration.
Related commands: voice vlan vlan-id enable, voice vlan enable, voice vlan qos cos-value
dscp-value, voice vlan qos trust.
Examples
# Display voice VLAN configurations.
<Sysname> display voice vlan state
Maximum of Voice VLANs: 1
Current Voice VLANs: 1
Voice VLAN security mode: Security
Voice VLAN aging time: 1440 minutes
Voice VLAN enabled port and its mode:
PORT
-----------------------------------------------
GigabitEthernet1/0/1
GigabitEthernet1/0/2
ffff-ff00-0000 Philips/NEC phone
ffff-ff00-0000 Polycom phone
ffff-ff00-0000 3com phone
OUI addresses supported
Masks of the OUI addresses supported
Description strings of the OUI addresses supported
VLAN
2
2
Description
MODE
AUTO
AUTO
2-2