Display Voice Vlan State - H3C S7500E Series Command Manual

Command Manual – VLAN
H3C S7500E Series Ethernet Switches
Table 3-1 Description on the fields of the display voice vlan oui command
Oui Address
Mask
Description

3.1.2 display voice vlan state

Syntax
display voice vlan state
View
Any view
Parameters
None
Description
Use the display voice vlan state command to display the voice VLAN configuration.
Related commands: voice vlan enable.
Examples
# Display the voice VLAN configurations.
<Sysname> display voice vlan state
Voice VLAN status: ENABLE
Voice VLAN ID: 2
Voice VLAN security mode: Security
Voice VLAN aging time: 1440 minutes
Voice VLAN enabled port and its mode:
PORT
--------------------------------
Ethernet2/0/2
Ethernet2/0/3
Ethernet2/0/4
Ethernet2/0/5
Field
OUI addresses that are allowed to pass
Mask of the OUI addresses that are allowed to pass
Description of the OUI addresses that are allowed to pass
MODE
MANUAL
MANUAL
MANUAL
AUTO
Chapter 3 Voice VLAN Configuration Commands
Description
3-2