Display Pim Bsr-Info - H3C S3600 Series Command Manual

Command Manual – Multicast
H3C S3600 Series Ethernet Switches-Release 1510
messages received are considered as matched only when their C-RP addresses match
the source address and their server group addresses are subset of those defined in
the ACL.
Related command: acl, rule.
Example
# Configure C-RP filtering policy on the C-BSR routers, allowing only 1.1.1.1/32 to be
C-RP and to serve only the groups 225.1.0.0/16.
<H3C>system-view
System View: return to User View with Ctrl+Z.
[H3C] multicast routing-enable
[H3C] pim
[H3C-pim] crp-policy 3000
[H3C-pim] quit
[H3C] acl number 3000
[H3C-acl-adv-3000] rule 0 permit source 1.1.1.1 0 destination 225.1.0.0
0.0.255.255

6.1.5 display pim bsr-info

Syntax
display pim bsr-info
View
Any view
Parameter
None
Description
Use the display pim bsr-info command to display the BSR information.
Related command: c-bsr, c-rp.
Example
# Display the BSR information.
<H3C> display pim bsr-info
Current BSR Address: 20.20.20.30
Local host is BSR
Priority: 0
Mask Length: 30
Expires: 00:01:55
Chapter 6 PIM Configuration Commands
6-5