Igmp Version - H3C S7500E Series Command Manual

Command Manual – Multicast
H3C S7500E Series Ethernet Switches
Description
Use the igmp timer query command to configure the IGMP query interval on the
current interface.
Use the undo igmp timer query command to restore the system default.
By default, the IGMP query interval is 60 seconds.
Related commands: timer query, igmp timer other-querier-present, display igmp
interface.
Examples
# Set the IGMP query interval to 125 seconds on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] igmp timer query 125

3.1.18 igmp version

Syntax
igmp version version-number
undo igmp version
View
Interface view
Parameters
version-number: IGMP version, in the range of 1 to 3.
Description
Use the igmp version command to configure the IGMP version on the current
interface.
Use the undo igmp version command to restore the default IGMP version.
The default IGMP version is version 2.
Related commands: version.
Examples
# Set the IGMP version to IGMPv1 on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] igmp version 1
Chapter 3 IGMP Configuration Commands
3-18